Fostex CR500 owner manual Editing a file name Edit file name

CD-R/RW MASTER RECORDER CR500 (MENU mode: DISK UTILITY menu)

Editing a file name [Edit file name]

The "Edit File Name" menu item edits the file name of a WAV file on an unfinalized BWF

disc. This menu item is not available with CD-DA discs and finalized BWF discs.

<Note>: After editing a file name, do not forget to rewrite the file system using the "Rewrite File Sys" menu item described on the previous page. However, each time you rewrite the system file, the number of remaining recordable files decreases by one and the remaining disc space decreases. Therefore, we recommend rewriting the system file after you complete all file editing operations.

If you attempt to eject an edited disc without rewriting the file system, the popup screen for rewriting the file system appears (see the previous page).

1)While the recorder is stopped, press the [ENTER/YES] key.

The unit enters the MENU mode and the MENU list screen as below is shown.

2)Use the [MENU] dial to highlight "DISK UTILITY " and press the [ENTER/YES] key.

The display now shows the DISK UTILITY menu screen.

4)Use the [MENU] dial to select an audio file you want to edit and press the [ENTER/YES] key.

The display now shows the "EDIT FILE NAME" screen. On this screen, you can edit the current file name (the rightmost character of the name flashes).

5)Edit the file name.

Use the [SKIP/CURSOR ] keys to move the cursor point (flashing point).

Use the numeric ([MEMORY]) keys or [MENU] dial to select the desired character of the flashing point.

Pressing the [CLEAR/+10] key deletes the immediate right character of the flashing point.

Therefore, by pressing the [CLEAR/+10] key repeatedly when the leftmost character flashes, you can delete the whole current name.

3)Use the [MENU] dial to highlight "Edit File Name " and press the [ENTER/YES] key.

The display now shows the screen for selecting an audio file from the audio file list.

<Note>: Do not edit or delete ".wav", the file extension of a file name. If you attempt to save a file name which does not have this file extension, the dis- play shows "Void" and returns to the previous screen.

5)After entering the desired name, press the [ENTER/YES] key.

The old name is replaced with the new name.

6)To exit the MENU mode, press the [STOP/ HOME] key.

The display returns the Home screen which has been shown before entering the MENU mode.

89