Fostex Playing back an ISO9660 formatted disc, CD-R/RWMASTER RECORDER CR500 Playback/Locate

CD-R/RW MASTER RECORDER CR500 (Playback/Locate)

Playing back an ISO9660 formatted disc

You can play back an audio file (WAV file) on an ISO9660 formatted disc recorded by a computer by selecting the root or a directory. The procedure example below assumes that an ISO9660 formatted disc which has the directory hierarchy as shown below is loaded.

Root

abwff

cbwff

#####001.wav

#####002.wav

#####003.wav

				<Note>: The CR500 displays the directory
	******			hierarchy from the root to the third level
				folders (32 at maximum) and you can se-
		******		lect a desired directory.
				In the hierarchy example on the left, you
				can select from among seven directories
bwf1			******	(the root and six folders).
				By selecting the root or a desired directory
				and creating the audio file table, you can
				play back a WAV file recorded on an
				ISO9660 formatted disc.

1)Set an ISO9660 formatted disc to the disc tray and close the tray.

The CR500 recognizes that an ISO9660 formatted disc is loaded and brings up the directory select screen as below.

2)Use the [MENU] dial to select the root (or a directory) and press the [ENTER/YES] key.

The audio file table of the root (or a directory) is created and the display returns to the Home screen.

3)Pressing the [PLAY] key starts playback from the first file on the audio file table.

You can use various playback functions as with a disc recorded by the CR500.

<Note>: To select another directory (or root), carry out either of the following operations.

•While the display shows the Home screen as shown on the left, press the [SHIFT] key to turn on the Shift mode, and press the

[FILE SEL/ DIR SEL ] key.

The display changes to show the directory select screen as shown on the left, on which you can select the root or a directory.

•While the display shows the Home screen as shown on the left, press the [ENTER/ YES] key to enter the menu mode and use the [MENU] dial to select "DIRECTORY SEL

", then press the [ENTER/YES] key.

The display changes to show the directory select screen as shown on the left, on which you can select the root or a directory.

67