DEC LA120 Emulation

Form Feed

FF

Causes the current line to be printed, and then advances the paper to the top of the next form. If a top margin is set, printing will continue at the top margin. Setting “Host FF at TOF” to “No” in the interface setup menu allows a form feed to be ignored if the paper is already at top of form. If “Auto CR” is set to “On” in the interface setup menu, a carriage return will also be performed.

Control code:

FF

Hexadecimal:

0C

Horizontal Tabs

Horizontal tab stops are associated with columns, not absolute physical positions. Changing character spacing will change the physical position of the tab stops. Default tab stops are set at every eighth column, i.e. column 9, 17, 25, 33, 41, etc. If different tab stops are to be set, the default tab stops should first be cleared.

Horizontal Tab

HT

Advances to the next horizontal tab stop. If no tab stop exists between the active column and the right margin, the HT will be ignored. Default tab stops are set at every eighth column, i.e. column 9, 17, 25, 33, 41, etc. Different tab stops may be set with ESC H, ESC 1, or ESC [ n1 ; n2 ; ... nx u.

Control code:

HT

Hexadecimal:

09

Set Horizontal Tab Stop

HTS

(or)

ESC H

(or)

ESC 1

Sets a horizontal tab stop at the current print position. The tab stop is associated with the active column, not an absolute physical position. Changing character spacing will change the physical position of the tab stop.

Default tab stops are set at every eighth column, i.e. column 9, 17, 25, 33, 41, etc. The tab stop set by this escape sequence will be added to previously set tab stops, including the default tab stops. If this is not desired, the old tab stops should first be cleared.

Control code:

HTS

 

Hexadecimal:

88

 

Escape Sequence:

ESC

H

Hexadecimal:

1B

48

Escape Sequence:

ESC

1

Hexadecimal:

1B

31

Set Horizontal Tab Stops

 

ESC [ n1 ; n2 ; ... nx u

Sets new horizontal tab stops at column n1, n2, n3, etc. 1≥n≥255. columns, not absolute physical positions. Changing character position of the tab stops. The leftmost column is column one.

The tab stops are associated with spacing will change the physical

74

Page 80
Image 80
Printek 8000 manual Control code Hexadecimal