PIONEERPOS G24-LC manual General Audio Commands, +MADIGITAL, Analog/Digital Audio Switching

Audio

Example

AT+MAFEAT=5,1	//Enables sidetone and noise suppress
OK
AT+MAFEAT?
+MAFEAT: 1,1	//Feature=1 (sidetone), state=1 (enabled)
+MAFEAT: 2,0	//Feature=2 (echo cancel), state=0 (disabled)
+MAFEAT: 4,1	//Feature=4 (noise suppress), state=1 (enabled)
+MAFEAT: 8,0	//Feature=8 (AGC), state=0 (disable)
OK

General Audio Commands

+MADIGITAL, Analog/Digital Audio Switching

This command switches between analog and digital audio modes. AT+MADIGITAL=1 switches to digital audio mode, and AT+MADIGITAL=0 switches it back to analog mode.

Command
Type	Syntax	Response/Action	Remarks
Set	+MADIGITAL=	OK	The Set command sets analog or digital
	<mode>	or:	audio modes.
		+CME ERROR: <err>
Read	+MADIGITAL?	+MADIGITAL:<mode>	The Read command returns the current
		OK	audio mode (analog or digital).
Test	+MADIGITAL=?	+MADIGITAL:	The test command returns the available
		<available audio modes>	digital audio modes.
		OK

The following table shows the +MADIGITAL parameters.

		Table 3-112: +MADIGITAL Parameters
<Parameter>		Description
<mode>	0	G24-L works in analog audio mode.
	1	G24-L works in digital audio mode.

Example

AT+MADIGITAL=? +MADIGITAL: (0,1) OK AT+MADIGITAL? +MADIGITAL: 0 OK AT+MADIGITAL=1

OK AT+MADIGITAL? +MADIGITAL: 1

3-170 G24-L AT Commands Reference Manual April 15, 2008