Digicom 3911, 3910 EIA LEDs, Data Stream Port1 Enable, Control EIALEDs, Eialed Port1CC

COMSPHERE 3900 Series Modems

If you want to disable the modem’s data stream, press the F2 key. When the message Command

Complete appears, press the key to clear the message.

Data Stream

Port1 Enable

F1 F2 F3

Press the F2 key again to enable the modem’s data stream.

To exit this function and remain in the Control branch, press the key. To exit and return to

the Top-Level menu, press the key.

EIA LEDs

Use the EIA LEDs function to change the port that controls the front panel LEDs. This function allows the front panel EIA LEDs to display the activity of a selected digital interface.

To access EIA LEDs from the Control branch, make the following selections:

Control:

EIA_LEDs

F1 F2 F3

Press the key until EIA_LEDs appears. Select EIA_LEDs.

EIA_LED : xxxxx

Port1CC

F1 F2 F3

Press the F1 key until the appropriate digital interface appears.

The xxxxx field displays the currently selected interface. The valid interfaces are Port1, and depending on the configuration option, either CC (NMS Control Channel), or DC (Diagnostic Channel). Refer to Diag Connection in Table 5-8, Miscellaneous Configuration Options, in Chapter 5, DCP Configuration.

Select the appropriate interface by pressing the corresponding function key.

EIA_LED : xxxxx

Command Complete

F1 F2 F3

7-4 September 1998 3910-A2-GN32-40