Digicom 3910, 3911 operation manual 01 551234 z Nxt, 019W5556789z Nxt

Call Setup Branch

Press the key until Change_Directory appears. Press any function key to select

Change_Directory.

01:551234z
Nxt	"	#

F1 F2 F3

The phone number listed in directory location 1 appears. Select Nxt to display other directory locations.

Entering Telephone Numbers and Dial Command Modifiers into Directory Locations

The following example uses an empty directory location for describing how to enter a telephone number. If you want to change an existing telephone number in any of the 24 directory locations, follow the same procedures.

To add a telephone number to a directory location, make the following selections:

02:z
Nxt	"	#

F1 F2 F3

Select Nxt until a blank directory appears on the LCD. (The cursor ( _ ) always appears in the first character position.)

Select F2 ( " ) or F3 ( # ) until the desired character is selected. This can be an alpha or numeric character.

02:z
Nxt	"	#

F1 F2 F3

Press the key to move the cursor to the next character position.

Continue this key sequence until the dial command modifiers and telephone number are entered. (Refer to Table 10-1 for a list of valid dial command modifiers.)

01:9W5556789z

Nxt " #

F1 F2 F3

3910-A2-GN32-40 September 1998 10-7