Digicom 3910, 3911 operation manual If you want to modify additional VF thresholds, select Nxt

Control Branch

Press the key to move the cursor to the next position ( 9 ).

Select the F2 ( " ) key to change the number above the cursor ( 9 ) to 0.

RSL High (- dBm)

Nxt " 10

F1 F2 F3

NOTE

If you want to modify additional VF thresholds, select Nxt.

To save the edited threshold(s):

RSL High (- dBm)

Nxt " 10

F1 F2 F3

Press the key to scroll up to the Edit/Save screen.

VF Thresholds

Edit	Save	Reset
F1	F2	F3

Select Save.

If the edited VF thresholds are valid, the Save command stores them into nonvolatile memory. When the Save completes, the message Save Completed appears.

Save VF Thresh

Thd Out of Range

F1 F2 F3

If the edited VF threshold is invalid (out of range), the error message Thd Out of Range appears. This indicates the Save procedure was unsuccessful. Return to the Edit screen and correct the invalid threshold range.

3910-A2-GN32-40 September 1998 7-15