Digicom 3911, 3910 operation manual Leased19.2 PList Control, Poll List Display Clear

COMSPHERE 3900 Series Modems

To access PList from the Top-Level menu, make the following selections:

Leased:19.2

PList Control

F1 F2 F3

Press the key until PList appears. Select PList.

Within a network link, a control modem can communicate with a tributary modem by using the tributary modem’s network management address for polling functions. Each tributary modem must have a different network management address. Refer to Misc in Chapter 5, DCP Configuration, for a description of the network management address (NetMngmtAddress) configuration option.

Over a diagnostic channel a tributary modem can communicate with control modems by using the control modem’s network management address for polling functions.

In the poll list, modems may be listed as either Active or Skip. Modems in the Active poll list are polled by the upstream modem. Modems in the Skip poll list are passed over during the polling process, but they are not deleted from the poll list.

Display

Display allows you to view the modem’s poll list.

To access Display from the PList branch, make the following selection:

Poll List:		>
Display		Clear
F1	F2	F3

Select Display.

NOTE

If there are no modems in the poll list when you select Display, the message Poll List Empty! appears on the second line of the LCD.

Poll	List:Disp
Nxt	xxx	yyyyyy
F1	F2	F3

6-2 September 1998 3910-A2-GN32-40