Digicom 3910, 3911 Trellis Multipoint tributary modems, Select Channel Secondary Prim Data blckd

Remote Branch

For Trellis Multipoint (TMp) control modems, you must specify the network management address of a tributary modem. The following display does not appear in point-to-point or

Trellis Multipoint tributary modems.

Choose Address:

Ent "xxx

F1 F2 F3

The address field (xxx) displays the network management address of the modem to be accessed by the Remote function. The valid address field range is from 001 to 256.

To increment digits within the address field (xxx), use the and keys to position the cursor ( _ ) under the digit that will be incremented. Press the F2 ( " ) key to increment the digit.

Press Enter (Ent) to select the modem that will be accessed by the Remote function.

For Trellis Multipoint (TMp) modems (control or tributary), you must specify the remote access password of the modem that will be accessed by the Remote function. The following display does not appear in point-to-point modems.

Choose Password:

Ent "yyyyyyyy

F1 F2 F3

The password field (yyyyyyyy) displays the remote access password of the modem to be accessed by the Remote function.

To increment digits within the password field (yyyyyyyy), use the and keys to position the cursor ( _ ) under the digit that will be incremented. Press the F2 ( " ) key to increment the digit.

Press Enter (Ent) to select the modem that will be accessed by the Remote function.

Select Channel		>
Secondary
F1	F2	F3

or

Select Channel		<
Prim	(data blckd)
F1	F2	F3

3910-A2-GN32-40 September 1998 13-3