Digicom 3911, 3910 operation manual Identity

COMSPHERE 3900 Series Modems

NonLnearDist	Non-Linear Distortion displays distortion which is usually associated with
	pulse-code modulation (PCM) compandor noise on the phone line. This
	value appears for Trellis Multipoint modulation.
Retrains	Retrains displays the number of retrains over the last 15 minutes of
	operation. The total 15-minute accumulation is updated every minute. This
	value appears for Trellis Multipoint modulation.

To exit VF and remain in the Status Branch, press the key. To exit and return to the

Top-Level menu, press the key.

Identity

Identity displays the modem’s serial number, model number, firmware revision level, hardware revision number and firmware part number. Retrieval of this information is useful if you are purchasing additional or replacement modems and/or making firmware upgrades.

To access Identity from the Status branch, make the following selection:

Status:
VF		Identity
F1	F2	F3

Press the key until Identity appears. Select Identity.

Status:Identity >

Ser#=00000000

F1 F2 F3

The modem’s serial number appears on the LCD’s bottom line. Press the key to scroll and view the model number, firmware revision level, hardware part number, and firmware part number.

Ser #	Serial number is an 8-digit number that identifies the modem.
Mod #	Model number is an alphanumeric number that identifies the modem as
	either a Model 3910 or Model 3911 modem.
FRev	Firmware revision level is an alphanumeric number that identifies the level
	of firmware loaded in the modem.
HPt #	Hardware part number is an 11-digit number that identifies the circuit card
	in the modem.
FPt #	Firmware part number is an 11-digit number that identifies to customer
	service personnel the firmware release number.

To exit the Identity function and remain in the Status branch, press the key. To exit and

return to the Top-Level menu, press the key.

4-6 September 1998 3910-A2-GN32-40