Digicom 3911, 3910 operation manual OptionsStatus 29V.33, Status Options Record

COMSPHERE 3900 Series Modems

Options

The Options Status function displays all optional firmware features currently installed in the modem. If no firmware options are installed, None_Installed appears on the LCD.

To access Options from the Status branch, make the following sections:

Status:
DTE		Options
F1	F2	F3

Press the key until Options appears. Select Options.

Options:Status >

V.29V.33

F1 F2 F3

If optional features are installed in the modem, they appear on the LCD’s bottom line. If other

features are installed, press the key to scroll other features into view.

To exit this function and remain in the Status branch, press the key. To exit and return to the

Top-Level menu, press the key.

Record

Record is a troubleshooting tool used by the end user in conjunction with support personnel. This function allows the end user to retrieve and report any sequence faults to support personnel. A sequence fault is an irregular or unexpected event.

There are two selections under Record: Display and Clear. Display allows up to eight sequence fault messages that have been recorded by the modem to be displayed on the LCD. If no sequence faults have occurred, then Modem O.K. appears.

Clear is used to remove all sequence fault messages from nonvolatile memory and the LCD.

To access Record from the Status branch, make the following selections:

Status:<

Options Record

F1 F2 F3

4-10 September 1998 3910-A2-GN32-40