Digicom 3911, 3910 Leased19.2 CallSetup, Call Setup Dial Disconnect, DialDirectory Nxt

COMSPHERE 3900 Series Modems

To access the Call Setup branch from the Top-Level menu, make the following selections:

Leased:19.2

Call_Setup

F1 F2 F3

Press the key until Call_Setup appears. Select Call_Setup.

Dial

For dial backup applications, Dial allows you to dial any telephone number stored in directory locations 1–24. Any telephone number dialed using the DCP must already exist in a directory location. Refer to Change Directory on page 10-6 for information on storing telephone numbers in directory locations.

For leased backup applications, Dial allows you to switch to the backup leased line. Any directory location may be used. The remote modem cannot automatically answer the simulated call. Use the Answer function of the remote modem in conjunction with the Dial function to manually switch to the backup leased line.

To access Dial from the Call Setup branch, make the following selection:

Call	Setup:	>
Dial	Disconnect
F1	F2	F3

Select Dial to display the first directory telephone number.

DialDirectory:

Nxt 01:5551234

F1 F2 F3

To view other directory locations, select Nxt.

DialDirectory:

Nxt 02:5461879

F1 F2 F3

10-2 September 1998 3910-A2-GN32-40