Digicom 3911, 3910 operation manual Poll ListChang Active Delete, Poll Listyyyyyy Ent

COMSPHERE 3900 Series Modems

Press the key until Change appears. Select Change.

Change allows you to add modems to the Active poll list (Active), delete modems from both Active and Skip poll lists (Delete), and move modems from the Active to the Skip poll list.

Poll List:Chang		>
Active	Delete
F1	F2	F3

To implement Change, select the appropriate function (Active, Delete, or Skip). (For Skip, you

will need to press the key until Skip appears.)

Poll List:yyyyyy

Ent "xxx

F1 F2 F3

The function field (yyyyyy) displays the function you selected (Active, Delete, or Skip).

The address field (xxx) displays the network management address of the modem to be changed. The valid address field range is from 001 to 256.

To increment digits within the address field (xxx), use the and keys to position the cursor ( _ ) under the digit that will be incremented. Press the F2 (") key to increment the digit.

Press Enter (Ent) to implement the function (yyyyyy) you selected (Active, Delete, or Skip). The message Command Complete appears on the second line of the LCD to indicate that the poll list change has occurred. If the message Poll List Check appears, you have attempted to delete an address that was not on the poll list, or you have attempted to add an address that was already on the poll list. If the message Poll List Error appears, you are in a point-to-point mode that does not support secondary channel (V.29). If the message Poll Lst too Big appears, you have entered a number greater than the maximum number of downstream devices. To return to the

selected function (Active, Delete, or Skip), press the key. The address automatically increments upon returning to this function.

To exit this function (Active, Delete, or Skip) and remain in the PList Change branch, press the key. To exit and return to the Top-Level menu, press the key.

6-4 September 1998 3910-A2-GN32-40