Digicom 3910, 3911 operation manual Add, Acquire function does not appear in Remote mode

Poll List Branch

Add

The Add function does not appear in Remote mode or on control modems.

Add allows you to add the tributary modem to a control modem’s poll list. This function should be initiated from only one tributary modem at a time.

To access Add from the Plist branch, make the following selections:

Poll	List:
Change		Add
F1	F2	F3

Press the key until Add appears. Select Add.

Poll List:Add

Command Complete

F1 F2 F3

The message Command Complete appears on the LCD to indicate that the tributary modem will be added to the control modem’s poll list.

To exit this function and remain in the PList branch, press the key. To exit and return to the

Top-Level menu, press the key.

Acquire

The Acquire function does not appear in Remote mode.

Acquire allows you to acquire an active poll list consisting of all modems that are one tier downstream. A modem will add to its poll list all downstream devices that respond to a poll.

To access Acquire from the Plist branch, make the following selections:

Poll List:		<
Add		Acquire
F1	F2	F3

3910-A2-GN32-40 September 1998 6-5