Digicom 3910, 3911 operation manual Backup Status Screens

Status Branch

		Table 4-2
	Backup Status Screens
Active Line	Inactive Line		Possible Inactive/Backup Line Condition
1st Screen Display	2nd Screen Display
Line=Pri 4w APL	Bckup:2wAPL=XXXX		Good indicates that line continuity is detected.
or	or		Bad indicates that line continuity is not detected.
Line=Pri 2w APL	Bckup : Dial =(blank)		???? indicates that the line condition is unknown
			(Backup Facility Check is making its first
			determination of the line conditions since the last
			retrain).
			blank indicates that the Backup Line Check option is
			disabled.
Line=Bkup 2w APL	Pri 4w APL =XXXX		Good indicates the line condition is good.
or	or		Bad indicates the line condition is bad.
Line = Dial Backup	Pri 2w APL =XXXX		???? indicates the line condition is unknown (Lease
			Lookback has not had enough time to make an initial
			appraisal of the line conditions since the last retrain).
			blank indicates the Lease Loopback option is
			disabled.
Line=Dial Only	No second screen		NOTE: When the modem is configured for Dial Only,
	display.		there is no backup.
			NOTE: The leased-line interface is disabled when the
			factory default options are loaded from the
			Async Dial, Sync Dial, or UNIX Dial
			templates.
Line=No Sync	No second screen		NOTE: No Sync appears when the modem is not
	display.		trained on either the primary or backup line
			facility.

To exit this function and remain in the Status branch, press the key. To exit and return to the

Top-Level menu, press the key.

3910-A2-GN32-40 September 1998 4-9