Digicom 3911, 3910 operation manual Press the key until SubHS appears. Select SubHS

COMSPHERE 3900 Series Modems

Press the key until SubHS appears. Select SubHS.

NOTE

If there are no modems in the multipoint poll list, the message Poll List Empty! appears on the second line of the LCD.

Sub-network HS

Nxt	xxx	yyyyyy
F1	F2	F3

When you select SubHS,

xxxDisplays the network management address of the downstream modem selected.

yyyyyyDisplays the status of the downstream modem. This message is updated every several seconds to display the latest status. MAJOR, MINOR, and STATUS display Health and Status alarm conditions; refer to Table 4-1 in the Device Health and Status (DeviceHS) section of Chapter 4, Status Branch, for additional information. UNKNWN appears when the modem does not recognize the downstream health and status information or device communication is not established. Normal appears if no alarms are present. NO RSP appears when the downstream modem does not respond to the poll.

Select Nxt to scroll through the entries in the poll lists.

To exit this function and return to the Top-Level menu, press the key.

9-2 September 1998 3910-A2-GN32-40