Technical Notes

Compaq Presario 7170/7180

Problem

A [k prints at the top of the page when printing from Windows 95 on a Compaq Presario 7170/7180

Cause

Configuration of parallel port in CMOS

Solution

Change CMOS on Compaq Presario 7170/7180 to enable bi-directional capability

Reboot computer, press "delete" to go into CMOS setup

At setup menu, cursor to "Advanced System Setup" and "Enter" to select From Advanced System Setup menu, select "Integrated Peripherals"

From the Integrated Peripherals Menu, Cursor to 'LPT Extended Mode" (Note: This is different than LPT1 mode)

The LPT Extended Mode will probably show "Standard"- USe the "Page Down" key to cycle to "ECP Mode"

Press "ESC" key to back to Advanced SYStem Setup Menu Press "ESC" key to go back to main setup menu

Press "F10" to save new configuration, and confirm save by answering "Yes" to final question

Toshiba Laptop

Problem

A[K prints at the top of the page and/or partial printout when printing on a Toshiba laptop.

Cause

Configuration of parallel port in CMOS and LPT.VXD file.

Case #1 Partial printout may occur with the following settings:

CMOS value for LPT1 is ECP LPT.VXD v4.00.950 file size 35,479

Case #2 [K is printed at top and the rest of the page is correct with the following settings: CMOS value for LPT1 is Standard Bi-Directional LPT.VXD v4.00.950 file size 35,487.

Page 71
Image 71
Canon BJC-250 user manual Technical Notes, Problem, Cause, Solution