Digicom 3910, 3911 operation manual Set Access Ctrl SetAdminPsWd, Set Admin PsWd Ent

Dial Access Security

Set Admin PsWd

Set Administrative Password is used to change the Administrative Password value. The Administrative Password is an 8-digit decimal number that allows authorized users to enter the Access Security Control function.

NOTE

If this value is forgotten, then the only way to access any of the security functions is by selecting Reset Security. This restores the password to a known value, but erases the contents of the modem’s security database.

To change the Administrative Password, make the following selections:

Set	Access Ctrl	<
Set_Admin_PsWd
F1	F2	F3

Press until Set_Admin_PsWd appears.

Select Set_Admin_PsWd.

Set Admin PsWd

Ent "00000000

F1 F2 F3

The Administrative Password appears.

Press the F2 ( " ) key to increment password values.

Press the key to move the cursor to the next position. Continue this sequence until the new password value is entered.

Press the F1 key to save the new password value.

3910-A2-GN32-40 September 1998 12-11