Digicom 3911, 3910 operation manual 14-26

COMSPHERE 3900 Series Modems

Table 14-3

(12 of 13)

391x Series S-Registers

S-Register		Description	DCP LCD
			Command
			Sequence
S93	V.29 Retrain. When enabled, the modem transmits a training		Configure\Edit\
	sequence whenever it receives one. This configuration option should		Leased
	normally be disabled for control modems.
	Register has the following values:
	0	= Enable
	1	= Disable
	The factory setting is Enable.
S94	V29	Link Configuration. Selects point-to-point or multipoint operation.	Configure\Edit\
	Register has the following values:		Leased
	0	= PointToPoint
	1	= Multipoint
	The factory setting is PointToPoint.
S95	Trellis Multipoint (TMp) Train Time. Defines the length of time energy		Configure\Edit\
	is sent from the tributary modem to the control modem. More severe		Leased
	line conditions require longer time selections.
	Register has the following values:
	0	= 10 milliseconds
	1	= 20 milliseconds
	2	= 50 milliseconds
	3	= 100 milliseconds
	4	= 200 milliseconds
	5	= 300 milliseconds
	The factory setting is 0 (10 milliseconds).
S96	Trellis Multipoint (TMp) Tx Preemphasis. Provides amplification for		Configure\Edit\
	frequencies above the carrier frequency to compensate for high		Leased
	frequency line attenuation.
	Register has the following values:
	0	= Disable
	1	= Enable
	The factory setting is Disable.

14-26 September 1998 3910-A2-GN32-40