Installation

Install Lens Motor:

1.Position the AutoScope Lens Motor (item #2) as shown in Figure 3-9.

2.Line up the mounting holes on the lens motor housing with those on the underside of the projector.

3.Secure the motor to the projector with the four (4), supplied 10-32 Pan-Head Phillips screws (item #1) and nylon spacers or aluminum standoffs (item #7).

4.Secure the AutoScope Ceiling Mount Adapters/Projector Stands to the motor using the two (2), supplied 10-32 Flat-Head Phillips screws (item #3).

Figure 3-9. AutoScope Lens Motor Installation

After you have installed the AutoScope lens motor, proceed with Mounting the

VX-3000don page 38.

32

VX-3000d Series Installation/Operation Manual

Page 48
Image 48
Runco VX-3000D operation manual Install Lens Motor, AutoScope Lens Motor Installation