Runco VX-3000D POWER/STANDBY LED Indicates power status as follows, Focus Ring Standard VX-3000d

Controls and Functions

4.TEMP LED

Indicates fan status and internal temperature as follows:

•Off during normal operation

•Red when internal temperature is too high or a fan failure occurs

5.INTAKE VENT

6.POWER/STANDBY LED Indicates power status as follows:

•Orange when the projector is in standby mode

•Flashes green for approximately 45 seconds after the projector is turned on to indicate that the lamp is warming up

•Green during normal operation

•Flashes orange for approximately 110 seconds after the projector is turned off to indicate that the lamp is cooling down

•Red when an internal failure requiring service has occurred

7.LAMP LED

Indicates lamp status as follows:

•Off during normal operation

•Red when the lamp has exceeded its usage life or developed a problem

8.RUNCO LOGO

The logo can be rotated to match the projector orientation: inverted (ceiling-mounted) or upright. To rotate the logo, grip it at the sides, pull it away from the projector and rotate it 180 degrees.

9.FRONT IR SENSOR

10.FOCUS RING (Standard VX-3000d)

To adjust the focus, grasp the lens by the outer ring and rotate it. (Use the remote control unit to adjust the focus with an VX-3000d Ultra.)

6 VX-3000d Series Installation/Operation Manual