Installation

5.Remove the rear cap from the lens. This protective cap is only used during shipping to protect the lens from damage.

6.Carefully cut and remove the plastic band around the lens motor connector wires.

Take great care not to cut the wires!

REMOVE

7.Detach the lens motor connector from the motor by removing the two screws holding it in place.

REMOVE

8.Note that the lens mount flange has a female socket connector for the lens motor on the right side of the flange.

Lens Motor

Connector

VX-3000d Series Installation/Operation Manual

25

Page 41
Image 41
Runco VX-3000D operation manual Take great care not to cut the wires, Remove