Runco VX-3000D Primary Lens Adjustments, Zoom Out Focus, Focus and Zoom, VX-3000d Ultra

Installation

3.9

Primary Lens Adjustments

The VX-3000d gives you a great deal of control over the picture size, position and focus.

Focus and Zoom – ➤	To focus the projected image, grasp the lens by the outer
VX-3000d	ring and rotate it.

To make the picture smaller (zoom out) or larger (zoom in), move the zoom tab in the appropriate direction.

Zoom in

Zoom

out

Focus

Focus and Zoom – ➤ The VX-3000d Ultra has motorized focus and zoom controls. To access them:

VX-3000d Ultra	1.	On the DHD Controller remote control or front panel, press MENU.
	2.	Select Service from the Main Menu and enter the Service Menu passcode.

You must enter a passcode to access the Service menu.

Note

3.Select Display Device from the Service Menu.

4.Select Configure from the Display Device menu, then select Lens.

The Lens menu gives you a great deal of control over the picture size, position and focus:

Focus: To focus the projected image, use the cursor buttons to highlight “In” or “Out.”

Then, press and hold the ENTER button.

Zoom: To make the picture smaller (zoom out), use the cursor buttons to highlight the minus sign (-). Then, press and hold the ENTER button.

To enlarge the picture (zoom in), use the cursor buttons to highlight the plus sign (+).

Then, press and hold the ENTER button.

Lens Shift ➤ Vertical Lens Shift: To shift the projected image vertically, use the cursor buttons to highlight “Up” or “Down” in the Lens menu. Then, press and hold the ENTER button to shift the lens in that direction.

Horizontal Lens Shift (VX-3000d Ultra only): To shift the projected image horizontally, use the cursor buttons to highlight “Left” or “Right” in the Lens menu. Then, press and hold the ENTER button to shift the lens in that direction.

50 VX-3000d Series Installation/Operation Manual