Runco VX-3000D operation manual Gray Yellow Cyan Green Magenta Red Blue

Operation

Color Saturation: On your external test pattern source, select a color bar pattern like the one shown in Figure 4-4.

gray yellow cyan green magenta red blue

Figure 4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint

1.Press the MENU button on the remote control or DHD Controller front panel.

2.Select Service from the Main Menu and press ENTER.

3.Enter the Service menu passcode.

4.Select Display Device from the Service menu and press ENTER.

5.Press ENTER again to select Configure.

6.Select Diagnostic and press ENTER.

7.Select Blue from the Diagnostic menu, then press ENTER to display only the blue color channel.

8.Press RETURN (or MENU) repeatedly to return to the Main Menu.

9.Select Picture from the Main Menu and press ENTER.

10.Select Color from the Picture menu and press ENTER.

68 VX-3000d Series Installation/Operation Manual