Runco VX-3000D operation manual Mounting, VX-3000d

Installation

3.6	There are several methods for mounting the projector. Depending on your chosen
Mounting the	installation, one method may be more suitable than another.
VX-3000d
Floor Mounting (Upright) ➤	In typical front and rear screen installations, the projector can be mounted to a secure and
	level surface such as a table or cart. Carts are useful when moving a projector during a
	presentation or from site to site. If possible, lock the wheels when it’s in position to prevent
	it from being moved during a presentation.
Ceiling Mounting ➤	For fixed installations, and for those that want the projector out of sight or have a limited
(Inverted)	space for projector and audience, you can invert the VX-3000d and suspend it from the
	ceiling using a specially-designed ceiling mount fixture.
	Note	Use only the Runco-approved ceiling mount kit designed for your
		projector. Install the mount kit according to the instructions
		provided with it.
	The projector can also be inverted and placed in an enclosure above and behind the
	viewing area. Install four feet on the inside bottom surface of the enclosure on which the
	projector can rest. A variety of materials can be used for this purpose (for example, rubber
	crutch tips or turntable feet).
Adjusting the Projector ➤	If the screen is significantly higher or lower than the projector (such as in a rear-projection
Height or Projection Angle	installation), you can tilt the projector at an angle. In a ceiling installation, you do this by

adjusting the ceiling mount.

The projector can be rotated (front-to-back) up to 30 degrees and mounted without it affecting performance. However, to ensure optimal performance of the lamp, limit the side-to-side tilt of the projector to ±15 degrees; see Figure 3-13.

± 15º max.

± 30º max.

Figure 3-13. Mounting Angle Ranges (Front-to-Back and Side-to-Side)

38 VX-3000d Series Installation/Operation Manual