Installation

Install Ceiling Mount Adapters/Projector Stands: For ceiling installations, these brackets bring the mounting points for the projector mounting plate (included with the projector ceiling mount kit) from the bottom of the projector up and around the AutoScope lens motor housing. For floor installations (where the projector is upright), the adapters allow the projector to lie flat on the mounting surface.

Using the four (4), supplied M6 x 12mm Flat-Head Phillips screws (item #6), attach the AutoScope Ceiling Mount Adapters/Projector Stands (items #4 and #5) to the projector as shown in Figure 3-8.

Figure 3-8. VX-3000d with Ceiling Mount Adapters/Projector Stands

DO NOT OVER-TIGHTEN THE SCREWS.

Caution

VX-3000d Series Installation/Operation Manual

31

Page 47
Image 47
Runco VX-3000D operation manual VX-3000d with Ceiling Mount Adapters/Projector Stands