BenQ MP610 user manual Pro-Picture menu

2. Pro-Picture menu

Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen.

FUNCTION
(default	DESCRIPTION
setting / value)
	Automatically resizes the input signal pixel resolution to the native resolution
	of the projector.
	On: The pixel resolution of the input signal is converted to the native
Auto Resize	resolution of the projector (800 x 600). For input signals with lower
	resolutions, gaps in the pixels are automatically interpolated into the image
(on)	before being projected. This may distort the image clarity.
	Off: The image is projected as its original resolution, with no pixel conversion.
	For input signals with lower resolutions, the projected image will display
	smaller than if resized to full screen. You could adjust the zoom setting or move
	the projector towards the screen to increase the image size if necessary. You
	may also need to refocus the projector after making these adjustments.
	There are two aspect ratio settings.
Aspect Ratio	1. 4:3 (for a standard screen) 2. 16:9 (for a wide screen)
(4:3)		16:9 aspect ratio is only sourced through the Component Video input
		when being fed an appropriate 16:9 aspect signal. See "Connecting a
		Component Video source device" on page 18 and "Obtaining a
		preferred projected image size" on page 12 for details.
	Adjusts the horizontal position
H Position	of the projected image.
(0)
			-30		+30
	Adjusts the vertical position of
	the projected image.
V Position
(0)
						+30
				-30
Phase	This function allows you to adjust the clock phase
	to reduce image distortion.
(depends on
the selected
input
source)
H Size (0)	Adjusts the horizontal width of the image.
Sharpness	Adjusts the image to make it look sharper or softer.
(15)

Operation 31