PIONEERPOS G24-L +MTTY, Motorola TTY Configuration, 31 +COLP Parameters, AT+COLP=0 OK AT+COLP=2

Chapter 3: AT Commands Reference

The following table shows the +COLP parameters.

		Table 3-31: +COLP Parameters
<Parameter>		Description
<n>	Sets/displays the result code presentation status of the G24-L.
	0	Disable (default)
	1	Enable
<m>	Displays the subscriber’s COLP service status in the network.
	0	COLP not provisioned
	1	COLP provisioned
	2	Unknown (for example, no network, and so on)
<number>	Sets the phone number, using the format specified by <type>.
<type>	Sets the address octet type in integer format (refer to GSM 04.08 [8] subclause
	10.5.4.7).
	129	Unknown
	145 International (used when dialing string includes "+" international access code
	character)
<subaddr>	Sets the subaddress, using the format specified by <satype>.
<satype>	Sets the address octet type in integer format (refer to GSM 04.08 [8] subclause
	10.5.4.8).
<alpha>	An optional, string-type, alphanumeric representation of <number> corresponding to
	the entry found in the phonebook. The character set is defined by +CSCS (Refer to
	“+CSCS, Select Terminal Character Set”, page 3-4).

Example

AT+COLP=0

OK AT+COLP=2

+CME ERROR: Numeric parameter out of bounds

+MTTY, Motorola TTY Configuration

This AT command is used to enable or disable TTY (Tele Typewriter) support in G24-L modules.

Note: Tele-typewriter or Teletype, a typewriter with an electronic communication. TTY is an electronic device for text communication via a telephone line, used when one or more of the parties have hearing or speech difficulties.

April 15, 2008 G24-L AT Commands Reference Manual 3-57