PIONEERPOS G24-LC manual Parameter Description P1,P2, P2 Mode

UI (User Interface)

	Table 3-144: +CRSM Parameters (Cont.)
<Parameter>		Description
<P1>,<P2>,	Integer type. Parameters passed on by the ME to the SIM. These parameters are man-
<P3>	datory for every command, except GET RESPONSE and STATUS.
	READ BINARY
	<P1> Offset high (0...255)
	<P2> Offset low (0...255)
	<P3> Length (0...255)
	READ BINARY
	<P1> Rec. No. (0...255)
	<P2> Mode	"02" = next record
		"03" = previous record
		"04" = absolute mode/current mode, the record
		number is given in P1 with P1='00' denoting
		the current record.
	<P3> Length (0...255)
	GET RESPONSE
	<P1> "00"
	<P2> "00"
	<P3> Length (0...255)
	UPDATE BINARY
	<P1> Offset high (0...255)
	<P2> Offset low (0...255)
	<P3> Length (0...255)
	UPDATE RECORD
	<P1> Rec. No. (0...255)
	<P2> Mode	"02" = next record
		"03" = previous record
		"04" = absolute mode/current mode, the record
		number is given in P1 with P1='00' denoting
		the current record.
	<P3> Length (0...255)
	STATUS
	<P1> "00"
	<P2> "00"
	<P3> Length (0...255)
<data>	Information which shall be written to the SIM (hexadecimal character format). Man-
	datory for UPDATE BINARY and UPDATE RECORD.

3-218 G24-L AT Commands Reference Manual April 15, 2008