Call Tone Mode, To Set Call Tone | Cobra Electronics MR HH425LI

Operating Your Radio

Call Tone Mode

48 English

Setup Mode Programming

Call Tone Mode

In Call Tone mode, your radio can alert you to incoming signals by sounding an audible call tone, a silent vibration or both. This setting will also allow you to transmit a unique Call Tone alert to identify your radio when you transmit messages. You can select from one of 10 different Call Tone signals.

To Set Call Tone:

1.From the previous press of the Call/Enter/Setup button, the LCD will display the letter “C” and the current Call Tone number (01 through 10).

2.Press the Channel Up/Down button to select a different Call Tone. An example of each call tone will sound for 1.5 seconds.

3.Press Call/Enter/Setup button to save this entry and move to the next setup programming mode.

NOTE

Call Tones are not usually used for Marine VHF communications. We allow you to turn it On for your unique communication needs.

NOTE

Once set, this is a global setting when in all radio modes.

Operating Your Radio

Roger Beep Mode

Key Tone Mode

Setup Mode Programming

Roger Beep Mode

In Roger Beep mode, your listener will hear an audible tone when you release the Talk button. This alerts your listener that you are finished talking and it is OK for them to speak.

To Set Roger Beep On or Off:

1.Display will show ROG icon and ON or OFF flashing.

2.Press Channel Up/Down button to select ON or OFF. ROG will be displayed when On.

3.Press Call/Enter/Setup button to save this entry and move to the next setup programming mode.

NOTE

Once set, this is a global setting when in all radio modes.

Key Tone Mode

In Key Tone mode, an audible tone will sound each time a button is pressed or you change a setting.

To Set Key Tone On or Off:

1.Display will show Key Tone icon and ON or OFF flashing.

2.Press Channel Up/Down button to select ON or OFF.

3.Press Call/Enter/Setup button to save entry.

NOTE

Once set, this is a global setting when in all radio modes.

You have now ended Marine (VHF) Setup programming mode and will enter Marine Standby mode.

Nothing Comes Close to a Cobra® 49

Image 28

Cobra Electronics MR HH425LI Call Tone Mode, To Set Call Tone, Roger Beep Mode, To Set Roger Beep On or Off, Key Tone Mode

Contents

Our Thanks to You Customer Assistance How Your CobraMarine VHF/GMRS Radio WorksFor Assistance in the U.S.A For Assistance Outside the U.S.A Backlit LCD Screen Product Features Radio Controls IndicatorsBacklit LCD Liquid Crystal Display Screen Lithium-Ion Rechargeable Battery Pack Signal Strength MeterChannel Scan/Memory Scan Instant Channel 16/9 Table of Contents Important Safety Information Safety Training InformationImportant Safety Information Always use only Cobra authorized accessories Recommendations for Marine Communication Recommendations for Marine Communication VHF Marine FCC Licensing Information Station LicenseInternational Station License Radio Call Sign VHF Marine Radio Procedures VHF Marine Voice Calling VHF Marine Voice CallingVessel Corsair is calling the vessel Vagabond VHF Marine Emergency Messages and Distress Procedure VHF Marine Radiotelephone Calls Three 3 spoken international emergency signals are Marine Emergency SignalsIf You Hear a Distress Call Marine Distress Procedure Tell where you areSay End message by saying VHF Marine Channel Assignments International Distress, Safety and Calling 156.700 Rx Only 156.750156.800 156.850 03A Government Only 21A U.S. Government Only Canada Coast Guard Only 20A Port Operations Port Operations, Ship Movement23A Government Only 64A U.S. Government Only Canada Commercial Fishing Digital Selective Calling Voice communications not allowed 81A U.S. Government Only Environmental Protection Operations Gmrs Communication Gmrs FCC Licensing GMRS/FRS Frequency Allocation and CompatibilityGmrs Communication Gmrs FCC Licensing Noaa Weather Channels Alert Noaa Test Alert SystemNoaa Emergency Weather Alert Weather Frequency/Channel Included in this Package Specific Area Message Encoding Same AlertsSpecific Area Message EncodingSAME Alerts Antenna, Wrist Strap Belt Clip Batteries and ChargerWrist Strap Belt Clip Initial Charge To Remove Battery Pack from RadioAlkaline Batteries Power/Volume/Squelch Controls Power On/Off Control Volume ControlGetting Started Common Radio Functions All Bands Call/Enter/Setup Button To Lock or Unlock the Buttons Squelch ControlTalk Button Backlight/Key Lock Button High/Medium/Low H-M-L Power Button To Toggle Between H-M-L Power ModesCall /Enter/Setup Button Scan Button Setup Mode Programming Setup Mode ProgrammingUSA/International/Canada Channel Maps To Set Channel Map Operating Area Voice Activated Transmit VOX Mode To turn VOX Mode On or OffVibrAlert Mode To set VOX Sensitivity Level Call Tone Mode Roger Beep ModeKey Tone Mode To Set Call Tone To Set Ctcss Code Entry Ctcss and DCS Coding ModeTo Set DCS Code Entry To Set Ctcss Code Scan Ctcss and DCS Code Scan ModeTo Set DCS Code Scan To Set WX Auto Search Scan On or Off To Set WX Alert On or OffTo Set Specific Area Message Encoding Same Alert On or Off Marine VHF Standby Mode Standby/Receive TransmitMarine VHF, Gmrs and WX Alert Standby Band Selections Standby/Receive and Transmit Gmrs Standby Mode Transmit Tx and Receive Rx ModesReceive Rx Icon Bar Graph Icon Transmit Tx Icon Bar Graph Icon To Transmit a Message Weather WX Standby Mode WX Alert Standby ModeWX Auto Search Scan Mode Function WX Auto Search Scan function is On Advanced Operation Channel 16/9 ModeAdvanced Operation Using Tri-Watch Tri-Watch Scan Mode Tri-Watch ModeTo Program or Edit the Tri-Watch Locations To Exit Memory Location Mode Memory LocationsTo Program Memory Locations To Recall a Stored Memory Location Channel Scan Mode Memory Location ScanTo Enter Channel Scan Memory locations, see Rewind-Say-Again Feature Using Rewind-Say-AgainUsing Rewind-Say-Again to Record Audio Transmission Example Maintenance Troubleshooting SpecificationsMaintenance Troubleshooting Product Service Product Service Accessories AccessoriesLapel Speaker Microphone