Operating Your Radio
VOX Mode
VOX Level
Setup Mode Programming
Voice Activated Transmit (VOX) Mode
In VOX mode, your radio can be used
To turn VOX Mode On or Off:
1.Display will show VOX icon and ON or OFF flashing.
2.Press Channel Up/Down button to select ON or OFF.
3.Press Call/Enter/Setup button to save this entry and move to the next setup programming mode.
To set VOX Sensitivity Level:
1.The display will show LE (level). VOX icon and 05 will be flashing.
NOTE
VOX sensitivity level is only visible when VOX is On.
2.Press Channel Up/Down button to change volume level of your choice. Remember, this selection is your voice sensitivity level during
05- indicates a Low (quiet) voice setting.
03- indicates a Medium voice setting.
01- indicates a High (loud) voice setting.
3.Press Call/Enter/Setup button to save this entry and move to the next setup programming mode.
NOTE
VOX will be turned Off automatically when the radio is turned Off. This will avoid accidental transmissions.
NOTE
Once set, this is a global setting when in all radio modes.
Operating Your Radio
VibrAlert® Tone Alert
Setup Mode Programming
VibrAlert® Mode
In VibrAlert® mode, your radio can alert you to incoming signals by sounding an audible call tone, a silent vibration or both.
NOTE
VOX will be turned Off automatically when the radio is turned Off. This will avoid accidental transmissions.
To set VibrAlert®:
1.The display will show either the Vibrate icon (shake bars), Call Tone icon (bell shape) or a combination VibrAlert® icon.
2.The present setting of either, 01, 02 or 03 will be flashing.
3.Press Channel Up/Down button to select one of the following:
01 = VibrAlert® On (both shake bars and bell shape).
02 = Vibrate On (shake bars only).
03 = Call Tone Only On (bell shape only).
4.Press Call/Enter/Setup button to save this entry and move to the next setup programming mode.
NOTE
Once set, this is a global setting when in all radio modes.
46 English
Nothing Comes Close to a Cobra® 47
