Cobra Electronics MR HH425LI Tri-Watch Mode, To Program or Edit the Tri-Watch Locations

Operating Your Radio

TRI-WATCH Button

TRI and MEM Icons

Channel Up/Down Button

64 English

Advanced Operation

Tri-Watch Mode

Tri-Watchmode gives you one (1) button access to scan a total of three (3) channels of most importance to you. Channel 16 is preprogrammed for you and will always be one (1) of the scanned locations. Two (2) other channels of your choice can be stored in the radio. These channels can be edited and/or recalled for future engagements of the Tri- Watch mode. Tri-Watchwill function in Marine and GMRS Standby modes.

NOTE

The radio must be squelched for Tri-Watchmode to function. See page 40 for Squelch procedure.

To Program or Edit the Tri-Watch Locations:

1.Press and hold the TRI-WATCHbutton for two (2)

seconds to activate Tri-Watch Setup mode. The TRI and MEM icons on the display will turn On.

NOTE

The main channel number will flash to indicate channel position. If there is no input activity for 15 seconds, the radio will sound two (2) beeps and return to Marine or GMRS Standby mode.

2.Press BAND button to select Marine or GMRS for the first Tri-Watchprogrammable channel.

3.Press Channel Up/Down button to select the desired Tri-Watchchannel.

4.Press and release TRI-WATCHbutton or Call/Enter/Setup button to confirm entry.

5.Repeat steps 2 through 4 to select second Tri-Watchprogrammable channel. The radio will scan Marine Channel 16 plus two (2) other selected channels in Marine or GMRS bands.

6. After programming both Tri-Watchmemory channels the radio will immediately engage Tri-Watchmode.

Operating Your Radio

TRI-WATCH Button

Tri-Watch Scan Mode

Advanced Operation

Using Tri-Watch

Tri-Watch Scan Mode:

1.From Marine or GMRS Standby mode, press the

TRI-WATCHbutton. The TRI icon will appear on the LCD display and the radio will scan through the three (3) Tri-Watchmemory channels.

2. A signal on any one (1) of the three (3) channels will stop the scan for 10 seconds to allow you to listen to the traffic on that location.

NOTE

After the Tri-Watchscan stops to monitor a channel, as long as you do not press any buttons within 10 seconds, your radio will automatically resume scanning the Tri-Watchchannels.

3.Press the Channel Up/Down button to resume

scanning the Tri-Watchchannels or to change the scan direction.

4.To EXIT the Tri-Watchscan, press the TRI-WATCH

button again. The TRI icon will disappear from the LCD and the radio will return to Marine or GMRS Standby mode.

Nothing Comes Close to a Cobra® 65