PIONEERPOS G24-LC manual +Empc

AT Commands Alphabetical Summary

Table A-1: AT Commands (Alphabetical) (Cont.)

AT Command	Description	Page
+EMPC	This command unlocks or	Page 3-187
	resets the first PLMN of the
	inserted SIM.
+EPIN	This command is only relevant	Page 3-181
	for phones that use SIM cards. It
	verifies the PIN2 indicator.
+FMI	This command requests	Page 3-1
	manufacturer identification.
+FMM	This command requests the	Page 3-2
	model identification.
+FMR	This command requests the	Page 3-3
	revision identification.
+GMI	This command requests	Page 3-1
	manufacturer identification.
+GMM	This command requests the	Page 3-2
	model identification.
+GMR	This command requests the	Page 3-3
	revision identification.
+GSN	This command requests the	Page 3-3
	product serial number
	identification.
+ICF	This command determines the	Page 3-142
	local serial port start/stop
	(asynchronous) character framing
	used by the DCE when accepting
	DTE commands and transmitting
	information text and result codes,
	whenever these are not done
	automatically.
+IPR	This command is responsible for	Page 3-133
	setting and saving the request
	baud rate.
+MADIGITAL	This command switches between	Page 3-170
	analog and digital audio modes.
+MAFEAT	This command controls the	Page 3-169
	various algorithm features, such
	as sidetone, echo cancel and
	noise suppress.
+MAMUT	This command controls the	Page 3-168
	muting/unmuting of all input
	paths (MIC, HDST_MIC,
	DIGITAL_RX).
+MAPATH	This command sets/requests the	Page 3-163
	active input accessory, and the
	output accessory for each feature.

A-10 G24-L AT Commands Reference Manual April 15, 2008