PIONEERPOS G24-LC +Mipcall, +Mipopen, +Mipodm, +Mipclose, +Mipsets, +Mipsend, +Mippush, +Mipflush

AT Commands Summary

Table 1-1: AT Commands (Cont.)

AT Command	Description	Page
TCP/IP Commands
+MIPCALL	This command creates a wireless PPP connection with the GGSN,	Page 3-276
	and returns a valid dynamic IP for the G24-L.
+MIPOPEN	This command causes the G24-L to initialize a new socket and open	Page 3-277
	a connection with a remote side.
+MIPODM	This command causes the G24-L to initialize a new socket in Online	Page 3-279
	Data Mode and open a connection with a remote side.
+MIPCLOSE	This command causes the G24-L to free the socket accumulating	Page 3-282
	buffer and disconnect the G24-L from a remote side.
+MIPSETS	This command causes the G24-L to set a watermark in the	Page 3-283
	accumulating buffer. When the watermark is reached, data is pushed
	from the accumulating buffer into the protocol stack.
+MIPSEND	This command causes the G24-L to transmit the data that the	Page 3-284
	terminal provides, using an existing protocol stack.
+MIPPUSH	This command causes the G24-L to push the data accumulated in its	Page 3-285
	accumulating buffers into the protocol stack.
+MIPFLUSH	This command causes the G24-L to flush (delete) data accumulated	Page 3-286
	in its accumulating buffers.
+MIPRUDP	This unsolicited event is sent to the terminal when data is received	Page 3-287
	from the UDP protocol stack.
+MIPRTCP	This unsolicited event is sent to the terminal when data is received	Page 3-287
	from the TCP protocol stack.
+MIPSTAT	This unsolicited event is sent to the terminal indicating a change in	Page 3-288
	link status.
+MIPXOFF	This unsolicited event is sent to the terminal to stop sending data.	Page 3-288
+MIPXON	This unsolicited event is sent to the terminal when the G24-L has	Page 3-289
	free memory in the accumulating buffer.
+MIPCONF	Configure Internal TCP/IP stack.	Page 3-289
+MPING	This command will allow verifying IP connectivity to another	Page 3-289
	remote machine (computer) by sending one or more Internet Control
	Message Protocol (ICMP) Echo Request messages.
+MPINGSTAT	This is the unsolicited response that the G24-L sends to the terminal	Page 3-296
	to inform of ping execution status update and provide summary
	statistics of ping request when ping request execution is completed.
+MSDNS	This command sets/reads DNS IP address for each socket.	Page 3-299
+MIPCFF	This command sets the Filtering List..	Page 3-301
NOP Compatible
Ignored (Compatible Only) Commands
%C	This command is supported for backward compatibility only, and	Page 3-304
	has no effect.

1-24 G24-L AT Commands Reference Manual April 15, 2008