WARNING

This symbol means important instructions. Failure to heed them can result in serious injury or death.

Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.

DO NOT OPEN, DISASSEMBLE OR ALTER THE UNIT IN ANY WAY. Doing so may result in fire, electric shock or product damage.

DO NOT INSERT ANY OBJECTS INTO THE UNIT. Doing so may result in fire, electric shock or product damage.

MAKE THE CORRECT CONNECTIONS. Failure to make proper connections may result in fire or product damage.

DO NOT SPLICE INTO A ELECTRICAL CABLES. Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT INSTALL THE UNIT IN AREAS WHERE THERE ARE HIGH LEVELS OF HUMIDITY, MOISTURE OR DUST. Doing so can result in electric shock or product failure.

FCC Warning: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in this User Guide. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

Note: This equipment has been tested and found to comply with Part 15 of the FCC Rules. These rules are designed to provide reasonable protection against harmful

harmful interference to radio communications if it is not installed and used in accordance with these instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:

•Relocate the receiving antenna.

•Consult the dealer or an experienced technician for help.

CAUTION

This symbol means important instructions. Failure to heed them can result in injury or material property damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return the tuner to your authorized retailer or nearest service center for repairing.

INSTALL THE WIRING SO THAT IT IS NOT CRIMPED OR PINCHED BY SCREWS OR SHARP METAL EDGES. Route the cables away from moving parts or sharp pointed edges. This will prevent crimping and damage to the wiring. If the wiring must pass through a metal hole, be sure to use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

USE THE SPECIFIED ACCESSORY PARTS AND INSTALL THE PRODUCT SECURELY. Be sure to use only the specified accessory parts. Use of non- specified parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose, resulting in hazards or product

Installation

It is recommended that prior to starting the installation, you read this installation section completely and follow the instructions. In addition, consult the manual of the audio device to which you will be connecting the SC-H1 Tuner to determine the required installation configuration:

•If power for the SC-H1 Tuner is not provided by your audio device via the DIN cable connection, you will need to use the provided AC Power Adapter to provide power for the SC-H1 Tuner.

•If audio input from the SC-H1 Tuner is not suported via the DIN cable connection of your audio device, you will need to connect the audio output of the SC-H1 Tuner to your audio system via the RCA-type or Optical audio output connectors of the tuner. (You will need to purchase the appropriate cable separately.)

Mounting the SC-H1 Tuner

Consider the mounting location carefully to

NORTH

WEST

1

5

 

 

 

 

2

be sure that you avoid the following:

•Any location where the tuner is exposed to moisture.

•Any location where the tuner is exposed to extreme heat.

The tuner may be mounted on a wall with #10 screws, using the slots on the underside of the tuner to hang on the tuner on the screws. Alternately, the tuner may placed on any flat surface.

SCREW

MOUNTING SLOTS

Installing the Antenna

Proper installation of the windowsill antenna is important for consistent satellite signal reception.

For correct operation and best reception of the SIRIUS signal, it is important that the

SKY

4 EAST

3 HORIZON

interference. This equipment may cause

failure.

SOUTH

4

SC-H1 SIRIUS Connect Tuner Installation Guide

SC-H1 SIRIUS Connect Tuner Installation Guide

5

Page 2 Page 4
Page 3
Image 3
Sirius Satellite Radio 3SIR-ALP10T manual Installation, Mounting the SC-H1 Tuner, Installing the Antenna
Page 2 Page 4

SC-H1, 3SIR-ALP10T specifications

Sirius Satellite Radio has revolutionized the way we experience audio entertainment in our vehicles with its advanced tuning systems and an extensive channel lineup. The Sirius Satellite Radio 3SIR-ALP10T is a prime example of the innovative technology that makes satellite radio highly desirable. This portable satellite radio receiver combines robust features, cutting-edge technology, and user-friendly characteristics that cater to a variety of audio enthusiasts.

One of the standout features of the 3SIR-ALP10T is its ability to receive over 130 channels of high-quality content, including commercial-free music, sports, news, and talk shows. This extensive selection allows users to enjoy a diverse array of programming that meets their preferences, whether they are at home, in the car, or on the go. The radio also comes equipped with the ability to create personalized preset channels, ensuring quick access to favorite stations.

The 3SIR-ALP10T utilizes SiriusXM's advanced satellite technology, which ensures a reliable signal across a wide geographical area. The receiver is designed to work seamlessly with the user’s existing audio system, providing an auxiliary output that makes it easy to connect to car stereos or home audio setups. The device is also compatible with various adapters, facilitating a hassle-free installation without compromising audio quality.

Additionally, this model incorporates advanced features such as the ability to pause, rewind, and replay live radio. This functionality allows users to catch missed segments, provide flexibility when listening, and enhance the overall listening experience. The radio also includes a large backlit display, making it easy to navigate through channels and settings, day or night.

Furthermore, the 3SIR-ALP10T supports SiriusXM's unique features like Traffic and Weather channels, which provide real-time updates, enhancing road safety and driving convenience. Subscribers can also access exclusive content and programming events, making satellite radio an attractive option for anyone who values quality entertainment while driving.

In summary, the Sirius Satellite Radio 3SIR-ALP10T stands out with its extensive channel offerings, exceptional technology, and user-friendly features, making it a compelling choice for audio enthusiasts seeking a premium radio experience. Its combination of portability and versatility ensures that users can enjoy high-quality programming wherever they go.
Top Page Image Contents