Sirius Satellite Radio SC-H1, 3SIR-ALP10T manual Operation, Specifications

Operation

Consult the owners manual of your SIRIUS- ready receiver for operating instructions.

The SC-H1 Tuner has an indicator light which provides basic status information about the tuner. When the tuner is first powered on, this light will be red to indicate the tuner is receiving power. After the initial power-on indication, the light will provide the following status information:

Steady Red: Initial power-on indication.

Flashing Red: Indicates that the antenna is not connected to the Tuner.

Steady Amber: Indicates that the antenna is connected to the Tuner, but no signal is being received.

Steady Green: Indicates that the Tuner is functioning properly and receiving a good signal.

Specifications

Operational Frequencies
Satellite	2322.293/2330.207 MHz
Terrestrial	2326.250MHz
Power Requirements	5 Volts DC
Dimensions	1” x 2.6” x 3.6” (WxHxD)
	26mm x 66mm x 92mm (WxHxD)
Antenna Type	Windowsill
Antenna Cable Length	21’ (single micro-cable)
Connector Type	SMB
Audio Interface	RCA-type Stereo L/R Connectors
	Optical Link Connector
Audio Output	0.75v, 550 Ohm
Signal to Noise Ratio	80dB
Weight	0.1 kg. (3.5 oz.)
Included Cable	8-Pin DIN Cable

Note: Design and specifications are subject to change without notice.

8 SC-H1 SIRIUS Connect Tuner Installation Guide SC-H1 SIRIUS Connect Tuner Installation Guide 9