EXTERNAL CONTROL DEVICE SETUP 31
01. Power (Command: k a)
To control Power On/Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
*In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.
*Note: In this model, set will send the Acknowledge after power on processing completion.
There might be a time delay between command and acknowledge.
02.Input Select (Command: x b)
To select input source for set. Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna) | Data 01: DTV (Cable) |
Data 10: Analog (Antenna) | Data 11: Analog (Cable) |
Data 20: AV or AV1 | Data 21: AV2 |
Data 40: Component or Component1 | |
Data 41: Component2 |
|
Data 60: | Data 90: HDMI1 |
Data 91: HDMI2 | Data 92: HDMI3 |
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
*Use the feature depending upon your model.
03.Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3 | Data: 09: Just scan |
Data 02: 16:9 | Data: 10: Cinema Zoom 1 |
Data 04: Zoom | … |
Data 06: Set by program | Data 1F: Cinema Zoom16 |
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
04.Screen Mute (Command: k d) To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00: Screen mute off (Picture on),
Data 01: Screen mute on (Picture off)
Data 10:
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
*In case of
05.Volume Mute (Command: k e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off)
Data 01: Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
06.Volume Control (Command: k f) To adjust volume.
You can also adjust volume with the volume buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to Real data mapping.
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
07.Contrast (Command: k g) To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to Real data mapping.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
08.Brightness (Command: k h) To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to Real data mapping.
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
09.Color (Command: k i) To adjust screen color.
You can also adjust color in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to Real data mapping.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
10.Tint (Command: k j) To adjust screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
11.Sharpness (Command: k k) To adjust screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to Real data mapping.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]