SMC Networks SMC6224M manual 225, Show queue mode, Show queue cos-map4-226

PRIORITY COMMANDS

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

•CoS values assigned at the ingress port are also used at the egress port.

•This command sets the CoS priority for all interfaces.

Example

The following example shows how to map CoS values 0, 1 and 2 to egress queue 0, value 3 to egress queue 1, values 4 and 5 to egress queue 2, and values 6 and 7 to egress queue 3:

Console(config)#interface ethernet					1/1		2
Console(config-if)#queue				cos-map 0	0	1
Console(config-if)#queue				cos-map 1	3	5
Console(config-if)#queue				cos-map 2	4
Console(config-if)#queue				cos-map 3	6	7
Console(config-if)#end
Console#show queue		cos-map ethernet 1/1
Information of Eth		1/1	3	4 5 6 7
CoS Value	: 0	1 2
Priority Queue: 0		0 0	1	2 2 3 3
Console#

Related Commands

show queue cos-map(4-226)

show queue mode

This command shows the current queue mode.

Default Setting

None

Command Mode

Privileged Exec

Example

Console#show queue mode

Queue mode: wrr

Console#

4-225