SMC Networks SMC6224M manual System Defaults

SYSTEM DEFAULTS

System Defaults

The switch’s system defaults are provided in the configuration file “Factory_Default_Config.cfg.” To reset the switch defaults, this file should be set as the startup configuration file (page 3-23).

The following table lists some of the basic system defaults.

Table 1-2 System Defaults

Function	Parameter	Default
Console Port	Baud Rate	9600
Connection
	Data bits	8
	Stop bits	1
	Parity	none
	Local Console Timeout	0 (disabled)
Authentication	Privileged Exec Level	Username “admin”
		Password “admin”
	Normal Exec Level	Username “guest”
		Password “guest”
	Enable Privileged Exec	Password “super”
	from Normal Exec Level
	RADIUS Authentication	Disabled
	TACACS Authentication	Disabled
	802.1X Port	Disabled
	Authentication
	HTTPS	Enabled
	SSH	Disabled
	Port Security	Disabled
	IP Filtering	Disabled

1-7