SMC Networks SMC6224M manual Show management, Privileged Exec

SYSTEM MANAGEMENT COMMANDS

•You can delete an address range just by specifying the start address, or by specifying both the start address and end address.

Example

This example restricts management access to the indicated addresses.

Console(config)#management all-client 192.168.1.19 Console(config)#management all-client 192.168.1.25 192.168.1.30 Console(config)#

show management

This command displays the client IP addresses that are allowed management access to the switch through various protocols.

Syntax

show management {all-client http-client snmp-client telnet-client}

-all-client- Adds IP address(es) to the SNMP, web and Telnet groups.

-http-client- Adds IP address(es) to the web group.

-snmp-client- Adds IP address(es) to the SNMP group.

-telnet-client- Adds IP address(es) to the Telnet group.

Command Mode

Privileged Exec

4-39