SMC Networks SMC6224M manual Port security, Port Security Commands, Max-mac-count

COMMAND LINE INTERFACE

Table 4-31 Port Security Commands

Command	Function	Mode	Page
port security	Configures a secure port	IC	4-104
mac-address-table	Maps a static address to a port in a VLAN	GC	4-176
static
show	Displays entries in the bridge-forwarding	PE	4-177
mac-address-table	database

port security

This command enables or configures port security. Use the no form without any keywords to disable port security. Use the no form with the appropriate keyword to restore the default settings for a response to security violation or for the maximum number of allowed addresses.

Syntax

port security [action {shutdown trap trap-and-shutdown} max-mac-count address-count]

no port security [action max-mac-count]

•action - Response to take when port security is violated.

-shutdown - Disable port only.

-trap - Issue SNMP trap message only.

-trap-and-shutdown- Issue SNMP trap message and disable port.

•max-mac-count

-address-count- The maximum number of MAC addresses that can be learned on a port. (Range: 0-1024)

Default Setting

•Status: Disabled

•Action: None

•Maximum Addresses: 0

Command Mode

Interface Configuration (Ethernet)

4-104