RATE LIMIT COMMANDS

rate-limit

Use this command to define the rate limit level for a specific interface. Use this command without specifying a rate to restore the default rate limit level. Use the no form to restore the default status of disabled.

Syntax

rate-limit {input output} level [rate] no rate-limit {input output}

input – Input rate

output – Output rate

rate – Maximum value.

(Fast Ethernet: Range: 1-255; Gigabit Ethernet: Range: 1-30)

Default Setting

Fast Ethernet: 255

Gigabit Ethernet: 30

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

Actual rate limit = Rate limit level * Granularity

Example

Console(config)#interface ethernet 1/1

Console(config-if)#rate-limit input level 20

Console(config-if)#

4-159

Page 407
Image 407
SMC Networks SMC6224M manual Rate-limit, Fast Ethernet Gigabit Ethernet, Actual rate limit = Rate limit level * Granularity