SMC Networks SMC6224M Map access-list ip, Syntax No map access-list ip aclname cos cos-value

ACCESS CONTROL LIST COMMANDS

map access-list ip

This command sets the output queue for packets matching an ACL rule. The specified CoS value is only used to map the matching packet to an output queue; it is not written to the packet itself. Use the no form to remove the CoS mapping.

Syntax

[no] map access-list ip acl_name cos cos-value

•acl_name – Name of the ACL. (Maximum length: 16 characters)

•cos-value– CoS value. (Range: 0-7)

Default Setting

None

Command Mode

Interface Configuration (Ethernet)

Command Usage

A packet matching a rule within the specified ACL is mapped to one of the output queues as shown in the following table. For information on mapping the CoS values to output queues, see queue cos-mapon page 4-224.

Table 4-35 Egress Queue Priority Mapping

Queue	0	1	2	3
Priority	1,2	0,3	4,5	6,7

Example

Console(config)#interface ethernet 1/25

Console(config-if)#map access-list ip bill cos 0

Console(config-if)#

Related Commands

queue cos-map(4-224)

show map access-list ip (4-126)

4-125