SMC Networks SMC6224M manual Exec-timeout, To set the timeout to two minutes, enter this command

LINE COMMANDS

Example

To set the timeout to two minutes, enter this command:

Console(config-line)#timeout login response 120

Console(config-line)#

Related Commands

silent-time(4-21)exec-timeout (4-14)

exec-timeout

This command sets the interval that the system waits until user input is detected. Use the no form to restore the default.

Syntax

exec-timeout [seconds] no exec-timeout

seconds - Integer that specifies the number of seconds. (Range: 0-65535 seconds; 0: no timeout)

Default Setting

•CLI: No timeout

•Telnet: 10 minutes

Command Mode

Line Configuration

Command Usage

•If user input is detected within the timeout interval, the session is kept open; otherwise the session is terminated.

•This command applies to both the local console and Telnet connections.

•The timeout for Telnet cannot be disabled.

•Using the command without specifying a timeout restores the default setting.

4-19