SMC Networks SMC6224M manual 172, Traffic Classes

CONFIGURING THE SWITCH

Command Attributes

•Priority – CoS value. (Range: 0-7, where 7 is the highest priority)

•Traffic Class12 – Output queue buffer. (Range: 0-3, where 3 is the highest CoS priority queue)

Web – Click Priority, Traffic Classes. The current mapping of CoS values to output queues is displayed. Assign priorities to the traffic classes (i.e., output queues), then click Apply.

Figure 3-73 Traffic Classes

CLI – The following example shows how to change the CoS assignments.

Console(config)#interface ethernet					1/1	4-143
Console(config-if)#queue				cos-map 0	0	4-224
Console(config-if)#queue				cos-map 1	1
Console(config-if)#queue				cos-map 2	2
Console(config-if)#end
Console#show queue		cos-map ethernet 1/1				4-226
Information of Eth		1/1	3	4 5 6 7
CoS Value	: 0	1 2
Priority Queue: 0		1 2	1	2 2 3 3
Console#

Note: Mapping specific values for CoS priorities is implemented as an interface configuration command, but any changes will apply to the all interfaces on the switch.

12. CLI shows Queue ID.

3-172