SMC Networks SMC6224M manual Command Groups

COMMAND LINE INTERFACE

Command Groups

The system commands can be broken down into the functional groups shown below.

Table 4-4 Command Groups

Command Group	Description	Page
Line	Sets communication parameters for the serial port	4-14
	and Telnet, including baud rate and console time-out
General	Basic commands for entering privileged access	4-26
	mode, restarting the system, or quitting the CLI
System	Controls system logs, system passwords, user name,	4-32
Management	browser management options, and a variety of other
	system information
Flash/File	Manages code image or switch configuration files	4-85
Authentication	Configures logon access using local or remote	4-93
	authentication; also configures port security and
	IEEE 802.1X port access control
Access Control List	Provides filtering for IP frames (based on address,	4-116
	protocol, TCP/UDP port number or TCP control
	code) or non-IP frames (based on MAC address or
	Ethernet type)
SNMP	Activates authentication failure traps; configures	4-135
	community access strings, and trap managers; also
	configures IP address filtering
Interface	Configures the connection parameters for all	4-142
	Ethernet ports, aggregated links, and VLANs
Mirror Port	Mirrors data to another port for analysis without	4-156
	affecting the data passing through or the
	performance of the monitored port
Rate Limiting	Controls the maximum rate for traffic transmitted or	4-158
	received on a port
Link Aggregation	Statically groups multiple ports into a single logical	4-160
	trunk; configures Link Aggregation Control
	Protocol for port trunks

4-12