SMC Networks SMC6224M manual Setting the Startup Configuration Settings

BASIC CONFIGURATION

If you download to a new file name using “tftp to startup-config” or “tftp to file,” the file is automatically set as the start-up configuration file. To use the new settings, reboot the system via the System/Reset menu.

Note that you can also select any configuration file as the start-up configuration by using the System/File/Set Start-Up page.

Figure 3-12 Setting the Startup Configuration Settings

CLI – Enter the IP address of the TFTP server, specify the source file on the server, set the startup file name on the switch, and then restart the switch.

Console#copy tftp startup-config 4-86

TFTP server ip address: 192.168.1.19

Source configuration file name: config-startup

Startup configuration file name [] : startup \Write to FLASH Programming.

-Write to FLASH finish. Success.

Console#reload

To select another configuration file as the start-up configuration, use the boot system command and then restart the switch.

Console#config
Console(config)#boot system config: startup-new	4-92
Console(config)#exit
Console#reload	4-30

3-27