SMC Networks SMC6224M manual Ip ssh server, Syntax No ip ssh server Default Setting, Disabled

SYSTEM MANAGEMENT COMMANDS

a.The client sends its public key to the switch.

b.The switch compares the client's public key to those stored in memory.

c.If a match is found, the switch uses the public key to encrypt a random sequence of bytes, and sends this string to the client.

d.The client uses its private key to decrypt the bytes, and sends the decrypted bytes back to the switch.

e.The switch compares the decrypted bytes to the original bytes it sent. If the two sets match, this means that the client's private key corresponds to an authorized public key, and the client is authenticated.

Note: To use SSH with only password authentication, the host public key must still be given to the client, either during initial connection or manually entered into the known host file. However, you do not need to configure the client’s keys.

ip ssh server

This command enables the Secure Shell (SSH) server on this switch. Use the no form to disable this service.

Syntax

[no] ip ssh server

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

•The SSH server supports up to four client sessions. The maximum number of client sessions includes both current Telnet sessions and SSH sessions.

•The SSH server uses DSA or RSA for key exchange when the client first establishes a connection with the switch, and then negotiates with the client to select either DES (56-bit) or 3DES (168-bit) for data encryption.

•You must generate the host key before enabling the SSH server.

4-49