SMC Networks SMC6224M manual 114, Rate Limit Configuration

CONFIGURING THE SWITCH

Web – Click Port, Rate Limit, Granularity. Select the required rate limit granularity for Fast Ethernet and Gigabit Ethernet, and click apply.

Figure 3-50 Rate Limit Granularity Configuration

CLI - This example sets and displays Fast Ethernet and Gigabit Ethernet granularity.

Console(config)#rate-limit	fastethernet granularity 512	4-160
Console(config)#rate-limit	gigabitethernet granularity 33300	4-160
console#show rate-limit		4-161
Fast ethernet granularity:	512

Gigabit ethernet granularity: 33300

Console#

Rate Limit Configuration

Use the rate limit configuration pages to apply rate limiting.

Command Usage

Input and output rate limit can be enabled or disabled for individual interfaces.

Command Attributes

•Port/Trunk – Displays the port number.

•Rate Limit Status – Enables or disables the rate limit. (Default: Disabled)

•Rate Limit Level – Sets the rate limit level. (Fast Ethernet – Range: 1-255: Default: 255; Gigabit Ethernet – Range: 1-30: Default: 30)

Note: Actual rate limit = Rate Limit Level * Granularity

3-114