COMMAND LINE INTERFACE

show interfaces switchport

This command displays the administrative and operational status of the specified interfaces.

Syntax

show interfaces switchport [interface]

interface

ethernet unit/port

-unit - Stack unit.

(Range – SMC6224M: 1-8, SMC6248M: 1-4, mixed stack: 1-4)

-port - Port number. (Range: 1-26/50)

port-channel channel-id(Range: 1-4)

Default Setting

Shows all interfaces.

Command Mode

Normal Exec, Privileged Exec

Command Usage

If no interface is specified, information on all interfaces is displayed.

Example

This example shows the configuration setting for port 24.

Console#show interfaces switchport ethernet 1/24

Broadcast threshold:

Enabled, 600 octets/second

LACP status:

 

Enabled

Ingress rate

limit: disable, Level: 30

Egress rate limit: disable, Level: 30

VLAN membership mode:

Hybrid

Ingress rule:

 

Disabled

Acceptable frame type:

All frames

Native VLAN:

untagged traffic:

1

Priority for

0

Gvrp status:

 

Disabled

Allowed Vlan:

 

1(u),

Forbidden Vlan:

NONE

Private-VLAN

mode:

Private-VLAN

host-association:

NONE

Private-VLAN

mapping:

NONE

Console#

4-154

Page 402
Image 402
SMC Networks SMC6224M manual Syntax Show interfaces switchport interface, Shows all interfaces